Commercial Window Cleaning Cost Calculator
Enter your building's floors, length and width and get a price range for cleaning the windows, or the windows and the facade.
Enter three numbers to get a price range
Wall area, not floor area. Leave blank to use floors, length and width.
Volume pricing, bigger buildings get lower rates. At this size yours works out to $0.04–$0.06 per sq ft, and rates keep easing up to 100,000 sq ft.
Windows and facade together price between $0.06–$0.15 per sq ft of outside wall, and bigger buildings get lower rates. Windows only runs about half of that. Wall above 180 ft is priced higher. The building's condition sets where in the range you land. Fixed price after a free site survey.
See how drone window cleaning is priced or the high-rise window cleaning service.
Using an AI assistant? It can get an estimate for any building as data from /estimate.json.
Worked examples
Average condition, worked out by the calculator for four buildings, assuming 10 ft per floor. The 20 and 25 floor buildings include height pricing for their wall above 180 ft. Each figure is an estimate.
| Building | Windows only | Windows + facade |
|---|---|---|
| 4 floors, 100 x 60 ft12,800 sq ft of outside wall | $600–$800 | $1,200–$1,650 |
| 10 floors, 100 x 100 ft40,000 sq ft of outside wall | $1,750–$2,250 | $3,500–$4,500 |
| 20 floors, 150 x 100 ft100,000 sq ft of outside wall | $3,950–$5,950 | $7,900–$12,000 |
| 25 floors, 200 x 150 ft175,000 sq ft of outside wall | $8,050–$12,000 | $16,000–$24,000 |
What the calculator works out
The calculator turns floors, length and width into the outside wall area, assuming four sides and 10 ft per floor, and prices that area. A larger building gets a lower rate, and a dirtier one lands higher in the range. The result is an estimate. One fixed price follows a free site survey.
- What to enter
- Floors, length and width
- Floor height assumed
- 10 ft
- Windows only
- About half of windows + facade
- Minimum charge
- None
- Fixed price
- After a free site survey
Calculator questions
What do I need to enter?+
Three numbers: how many floors the building has above ground, and its length and width in feet. If you already know the outside wall area, enter that instead and it takes over.
How does the calculator get the wall area?+
It adds the length and width, doubles the result to cover all four sides, then multiplies by the number of floors and by an assumed 10 ft per floor. Real buildings run about 9 to 12 ft per floor, so the wall area can be off by around 10 to 20 percent. Entering the measured wall area is more accurate.
What if my building is not a simple rectangle, or not every side is being cleaned?+
For an odd shape, the overall length and width give a rough number. If the building is attached to its neighbours, or only one or two sides are being cleaned, the four-side figure is too high: enter the wall area of the sides being cleaned instead. We measure the building before we fix a price.
How much less is windows only than windows and facade?+
About half. Change what we are cleaning in the calculator and the range for the same building drops to about half.
Does a bigger building cost less per square foot?+
Yes. The rate eases as the wall area grows, until 100,000 sq ft. The worked examples above show the effect.
Does a taller building cost more?+
Yes, for the wall high up. Wall up to 180 ft above ground is priced at the normal rate, wall from 180 to 300 ft at double the rate, and wall more than 300 ft above ground at two and a half times the rate, because high work takes longer and needs more rigging. The calculator takes the height from the number of floors, at 10 ft per floor, so a building of up to 18 floors is priced at the normal rate throughout.
Is the calculator's number my price?+
No. It is an estimate from a few inputs. We confirm the area and look at the building at a free site survey, then give one fixed price.
What property managers say
Google reviews from the managers of buildings we cleaned, word for word.
“We hired Vista Drone Cleaning to clean the windows and exterior of Cypress Plaza, our three-story, 40,000-square-foot office building in Fort Lauderdale. Algae and buildup had accumulated along the panel joints, ledges, and glass on every side of the building, and the difference afterward was impressive.
Their team cleaned every window, the entire building exterior, and the entrance walkway, all in a single day. The entire job was completed from the ground without lifts or scaffolding. They soft washed the exterior and used purified water on the glass, leaving the building looking noticeably cleaner and brighter.
The crew kept the work areas safely coned off and got everything done with very little disruption to our tenants.
If you manage a commercial property in Fort Lauderdale or Broward County and need professional window cleaning or exterior building washing, I’d recommend Vista Drone Cleaning.”
“We were very pleased with the work performed by Vista Drone Cleaning at Sentral Wynwood. Finding a reliable company for professional high-rise window cleaning and commercial pressure washing can be challenging, and Vista delivered an excellent experience. Their advanced drone technology provides an innovative way to handle building facade cleaning and exterior maintenance, particularly on taller buildings and hard-to-reach areas. Their team was knowledgeable, professional, and efficient throughout the project. We highly recommend Vista Drone Cleaning to property managers, condominium associations, and commercial building owners looking for exterior cleaning services in Miami and throughout Florida.”
Keep exploring
Related services, pricing, and answers, all in one click.
Done estimating? Get the real number
The calculator gives a range. Send the address and we'll fix the price for your building after a free site survey.
