{
  "quickStart": [
    {
      "does": "Windows + facade from floors, length and width (height from floors)",
      "url": "https://vistadronecleaning.com/estimate.json?service=exterior&floors=24&length_ft=150&width_ft=100&scope=full"
    },
    {
      "does": "Windows + facade from a measured wall area and height",
      "url": "https://vistadronecleaning.com/estimate.json?service=exterior&sqft=148068&height_ft=236&scope=full"
    },
    {
      "does": "Whole property: facade, roof, garage and a total",
      "url": "https://vistadronecleaning.com/estimate.json?service=building&facade_sqft=60000&height_ft=200&scope=full&roof_sqft=20000&type=commercial&garage_deck_sqft=120000"
    }
  ],
  "about": "Vista Drone Cleaning price estimates as JSON, computed by the same function as the calculators on the site. Estimates are not quotes: the fixed price follows a free site survey.",
  "quote": {
    "phone": "(786) 292-3637",
    "url": "https://vistadronecleaning.com/contact"
  },
  "usage": {
    "endpoint": "/estimate.json",
    "method": "GET",
    "parameters": {
      "service": "exterior | roof | garage | building (required)",
      "sqft": "exterior and roof: square feet of facade (exterior) or roof (roof), up to 5000000 (required, unless exterior sends floors and a footprint). garage: accepted as deck_sqft. Not accepted by building",
      "floors": "exterior and building: number of floors above ground, a whole number from 1 to 100. With length_ft and width_ft (or perimeter_ft) it replaces sqft / facade_sqft. It also sets the building's height for height pricing (floors x 10 ft) unless height_ft is sent, including when sqft / facade_sqft is sent",
      "height_ft": "exterior and building: the building's height above ground in whole feet, 1 to 2,000, for height pricing (wall above 180 ft is priced higher). Optional: without it floors x 10 ft is used when floors are sent, and with neither no height pricing is applied. If height_ft and floors disagree, height_ft is used",
      "roof_length_ft": "roof and building: roof length in feet, 10 to 2000. With roof_width_ft it replaces the roof area (length x width, the footprint)",
      "roof_width_ft": "roof and building: roof width in feet, 10 to 2000",
      "length_ft": "exterior and building: building length in feet (for the FACADE, with floors); roof: accepted as roof_length_ft. The short names length and width are accepted wherever length_ft and width_ft are. On building the roof always uses roof_length_ft, 10 to 2000",
      "width_ft": "exterior and building: building width in feet, 10 to 2000",
      "perimeter_ft": "exterior and building: building perimeter in feet, instead of length_ft and width_ft",
      "scope": "windows | full (windows + facade). exterior: default windows. building: required with facade_sqft",
      "type": "commercial | residential. roof: default commercial. building: required with roof_sqft or roof dimensions",
      "condition": "light | avg | heavy. Default avg. Does not change garage rates",
      "deck_sqft": "garage only: square feet of deck and drive surface",
      "wall_sqft": "garage only: square feet of walls, columns, ceilings and stairwells",
      "facade_sqft": "building only: square feet of facade, priced like service=exterior. Needs scope. Or send floors with length_ft and width_ft",
      "roof_sqft": "building only: square feet of roof, priced like service=roof. Needs type. Or send roof_length_ft and roof_width_ft",
      "garage_deck_sqft": "building only: garage deck, priced like service=garage",
      "garage_wall_sqft": "building only: garage walls, priced like service=garage"
    },
    "services": {
      "exterior": "Windows, or windows + facade, on one building. Needs sqft, or floors with length_ft and width_ft (or perimeter_ft) when the facade area is not known",
      "roof": "Roof cleaning. Needs sqft, or roof_length_ft and roof_width_ft when the roof area is not known",
      "garage": "Parking garage. Needs deck_sqft, and wall_sqft to add the walls. Rates are published for garages of 100,000 sq ft of deck and up; smaller ones return surveyRequired instead of a price",
      "building": "A whole property in one call: any of facade_sqft (with scope), roof_sqft (with type), garage_deck_sqft, garage_wall_sqft. The facade can be sent as floors with length_ft and width_ft, and the roof as roof_length_ft and roof_width_ft; the two are never inferred from each other. Returns one line per service and a total. No bundle discount is applied"
    },
    "notes": [
      "Parameters a service does not use are ignored and listed in `warnings`; defaulted ones are listed in `defaultsApplied`",
      "A line with `surveyRequired: true` has `estimate: null` and is never part of a total",
      "Which size input to use: sqft (facade_sqft on building) if the outside wall area is known; otherwise floors with length_ft and width_ft; perimeter_ft only for a building that is not a rectangle",
      "Sending the same parameter twice with different values is an error",
      "Facade area from dimensions is perimeter x floors x an assumed 10 ft per floor. Real buildings run about 9 to 12 ft per floor, so the wall area can be off by around 10 to 20 percent. Entering the measured wall area is more accurate. If an area is sent as well, the area is used and the dimensions are listed in `warnings` (floors still give the building's height)",
      "Height pricing applies to windows and facade only, never to roofs or garages. Height pricing (windows and facade): wall up to 180 ft above ground at the normal rate, 180 to 300 ft at 2x, above 300 ft at 2.5x. Each section of wall is weighted by its share of the building's height. The exterior line's `heightPricing` shows the height used, where it came from (height_ft, floors or none), the overall multiplier and the sq ft in each section"
    ],
    "howToMeasure": {
      "facade": "Facade area in square feet: the outside wall of every elevation to be cleaned, windows included. Use the same figure for windows only and for windows + facade. Wall area = length x height for each elevation, added together. If the area is not known, send floors with length_ft and width_ft (or perimeter_ft) instead: the facade area is then taken as the building's perimeter x floors x an assumed 10 ft per floor. Real buildings run about 9 to 12 ft per floor, so the wall area can be off by around 10 to 20 percent. Entering the measured wall area is more accurate.",
      "height": "height_ft: the building's height above ground in whole feet, to the top of the wall being cleaned. If it is not sent, floors x 10 ft is used when floors are known. Wall above 180 ft is priced higher, so a tall building without a height is estimated low.",
      "roof": "Roof surface area in square feet. If it is not known, send the roof's length and width in feet instead (roof_length_ft and roof_width_ft; on service=roof plain length_ft and width_ft also work) and the area is taken as length x width. Length x width is the roof's footprint. A pitched or tile roof has more surface than its footprint, so the estimate can run low. A measured roof area is more accurate.",
      "garageDeck": "deck_sqft in square feet. Deck area is the gross drive-on surface of every level, ramps included: count every level, the top deck too. The method differs by area (a ground crew pressure washes the covered decks and ramps, the drone cleans the open top deck), but all of it is deck area. The garage's exterior facade is not part of deck_sqft or wall_sqft; it is quoted after a free site survey.",
      "garageWall": "Vertical and overhead surface inside the garage in square feet: walls, columns, ceilings and stairwells."
    },
    "examples": [
      "https://vistadronecleaning.com/estimate.json?service=exterior&sqft=60000&scope=full",
      "https://vistadronecleaning.com/estimate.json?service=exterior&floors=12&length_ft=200&width_ft=80&scope=full",
      "https://vistadronecleaning.com/estimate.json?service=exterior&sqft=148068&height_ft=236&scope=full",
      "https://vistadronecleaning.com/estimate.json?service=roof&sqft=2500&type=residential&condition=light",
      "https://vistadronecleaning.com/estimate.json?service=roof&roof_length_ft=60&roof_width_ft=40&type=residential",
      "https://vistadronecleaning.com/estimate.json?service=garage&deck_sqft=150000&wall_sqft=40000",
      "https://vistadronecleaning.com/estimate.json?service=building&facade_sqft=60000&height_ft=200&scope=full&roof_sqft=20000&type=commercial&garage_deck_sqft=120000",
      "https://vistadronecleaning.com/estimate.json?service=building&floors=12&length_ft=200&width_ft=80&scope=windows&roof_sqft=16000&type=commercial"
    ]
  }
}
